Remote Control; Pairing Mode; Heating Power - Heating Period - Lenz Rcb 1200 Bedienungsanleitung

OPERATING INSTRUCTIONS / ENGLISH

REMOTE CONTROL

The lithium packs rcB 1200 / lithium packs rcB 1800 can be controlled via the Lenz heat app*
for smartphones. The lithium packs must be in "Pairing Mode" to be able to couple them properly
with the smartphone.

Pairing Mode

Please switch the desired lithium packs to "Pairing Mode". For this purpose, push the control
button (Fig. 1.3.) for approx. 10 seconds until the heat setting displays (Fig. 1.2.) are blinking
and then immediately release the control button. The heat setting display in the middle is
flashing constantly.
Note: The Pairing Mode remains active for 2 minutes! If no pairing takes place during this
time, this mode will end automatically!
*The optional Lenz heat app* for convenient control is available for download via the
Android Play Store and the Apple Store.

HEATING POWER - HEATING PERIOD

The heating times for the heat settings are outlined in the following table for your information.
Heat Heating period,
setting lithium pack
rcB 1200
(Use with
heat socks)
1 10,0 – 14,0 h
2 5,5 – 7,5 h
3 3,5 – 4,5 h
LED, steady on – Pairing Mode
Heating period,
lithium pack
rcB 1200
(Use with
heat vest)
5,5 – 7,5 h
3,0 – 4,0 h
2,0 – 2,5 h
– 28 –
Heating period, Heating period,
lithium pack
rcB 1200
(Use with
heat bandage)
5,5 – 7,5 h
3,0 – 4,0 h
2,0 – 2,5 h
lithium pack
rcB 1200
(Use with
heat gloves)
6,0 – 7,5 h
3,0 – 4,0 h
2,0 – 2,5 h