Product Description; Technical Specifications; First Use And Charging; Charging Process - Lenz Rcb 1200 Bedienungsanleitung

PRODUCT DESCRIPTION

lithium pack rcB 1200 / lithium pack rcB 1800
Snap fasteners to establish the connection to the charger and the heatable textile (Fig. 1.1)
￭
Heat setting display 1 / 2 / 3 (Fig. 1.2)
￭
Control button (Fig. 1.3)
￭
Contact protector (Fig. 1.4)
￭
Charger
Power supply (Fig. 2.1)
￭
Charge indicator (Fig. 2.2)
￭
Charger plug (Fig. 2.3)
￭

TECHNICAL SPECIFICATIONS

Global USB power supply unit
(with exchangeable plug)
lithium pack rcB 1200
lithium pack rcB 1800

FIRST USE AND CHARGING

Important note:
Charge the lithium packs prior to their first use!

Charging process

1. Connect the charging cable with the USB power supply unit and plug the USB power
supply unit into a socket. The charge indicator (Fig. 2.2) will light up green.
2. Remove the contact protector (Fig. 1.4) and connect both lithium packs to the charging plugs
of the charging cable (Fig. 2.4). Please refer to the diagram on the charging plugs for correct
orientation. The lithium packs can be charged in any operating mode.
3. The charging process starts after one-time operation of the control button (Fig. 1.3.).
4. The charge indicator (Fig. 2.2) will light up red during the charging process.
Input: 100 V - 240 VAC
(50/60 Hz), max. 150 mA
– 23 –
Output: 5V / 1A DC
Output: 3,7 V / 2400 mAh
Output: 3,7 V / 3600 mAh