Use With Lenz Heat Gloves; Important Instructions For Use; Functional Description - Lenz Rcb 1200 Bedienungsanleitung

OPERATING INSTRUCTIONS / ENGLISH

Use with Lenz heat gloves

Put on the heat gloves.
￭
Remove the contact protector from the lithium packs (Fig. 1.4).
￭
Place the lithium packs into the pocket provided on the heat gloves. (Figure 6.1)
￭
Press the lithium packs onto the snap fasteners of the heat gloves until they audibly
￭
snap into place (Fig. 6.2).
The lithium packs can be easily controlled manually using the symbol provided on the glove
￭
(Fig. 6.3) or optionally via the convenient Lenz heat app* control on a smartphone.

IMPORTANT INSTRUCTIONS FOR USE

When using the heat socks, the optimal heating power is only reached when the socks, boots
￭
and soles are dry.
When using the heat vest or heat brace, the optimal heating power is only reached if
￭
the vest or brace and other tops you are wearing are dry.
When using the heat gloves, the optimal heating power is only reached when the gloves are dry.
￭
Do not operate the device at the highest heating power for longer than several minutes.
￭
Always set the product to a low or medium heat output to maintain a comfortably warm
￭
temperature (the heater should be virtually unnoticeable).

FUNCTIONAL DESCRIPTION

lithium pack rcB 1200 / lithium pack rcB 1800
The lithium packs have three operating modes: POWER OFF – STANDBY – IN USE. They are
indicated with the heat setting display (Fig. 1.2) on the lithium packs and the remote control. The
number of illuminated LEDs corresponds to the selected heat setting.
POWER OFF:
The lithium packs are completely turned off and the heat setting display (Fig. 1.2)
￭
is permanently off.
They can only be switched on with the control button (Fig. 1.3) of the lithium packs.
￭
– 26 –