Use And Function - Lenz Rcb 1200 Bedienungsanleitung

Note:
The lithium packs cannot be switched to the POWER OFF mode manually!
If there is no heatable textile or charger connected to the lithium packs, the lithium
packs automatically switch to the POWER OFF mode after 12 hours!
(If you are using the Lenz heat app* to control your lithium packs remotely, the app must
also be closed on your smartphone in order for the lithium packs to be able to successfully
switch to the POWER OFF mode.)
IN USE:
The lithium packs supply the connected heatable textile with power.
￭
STANDBY:
The heat setting display (Fig. 1.2) flashes briefly at an interval of 2.5 seconds.
￭
The lithium packs are in stand-by and can be activated with the control button of the lithium
￭
packs (Fig. 1.3), or via the Lenz heat app* (Smartphone).

USE AND FUNCTION

Turn on the product to the lowest heat setting by briefly pushing the control button
(approximately 0.5 seconds) on the lithium pack (Fig. 1.3).
Push the control key repeatedly to switch to the next higher setting and back to standby mode
after level 3.
The respective heat setting is indicated by the illumination of the heat setting display (Fig. 1.2)
on the lithium pack.
LED, flashing – standby (no heating power)
LED, steady on – low heating power
LEDs, steady on – meduim heating power
LEDs, steady on – high heating power
– 27 –