On Range Setup (On-Ra); Displays Setup (D-Dp); Counting Pieces Mode - Gram GX Serie Benutzerhandbuch

On range setup (on-ra)

Press the key
"range", press again the key
access to the function
F.E and 100% of F.E. To confirm press the key

Displays setup (d-dp)

Press the key
press again the key until you see "d-dp". Press the key
press the key
N= Only one display
Y= Two displays
Press the key

Counting pieces mode

Enter to "change units" and select the option "pcs". Press the key
then the indicator "pcs" will light on.
Sampling procedure:
Press the key
weighing pan and press the key
Press the key
move to the right. When the last digit flashes, press the key
sampling, now the display will show the number of pieces used as a sample.
To exit, enter again to "change units" and select the desired unit weight, the
for 3 seconds until the display shows the message
and to select the desired option between 20% of
for 3 seconds until the screen shows the message "range",
to select the desired option.
to confirm and exit.
, the message "count" will appear. Put the sample on the
to increase the value of the digit and press the key
until you see "on-ra". Press the
.
in order to introduce the sample's value.
to
to access and
and
to
to finish the
13