To adjust the angle and width of the lateral
supports, loosen the Allen bolt on the lateral
bracket (d), adjust to the required angle and
width and retighten the Allen bolt securely.
Repeat this on the other side. If you wish to
adjust the relative height of the lateral there
are several locations at which to attach the
lateral and angle mechanism (e). To adjust
simply remove mechanism and reattach at
desired height.
E
9.12 Increase Tray
Adjustment
To increase the depth adjustment of the
tray, reposition the tray bars further back.
To do this, unscrew the Allen bolts holding
the tray bars on (a), move the bars to the
holes further back (b) replace the bolts and
retighten all bolts securely.
D
A
B