Leckey Mygo Benutzerhandbuch Seite 29

9.5 Positioning the
sandals
Each sandal is attached to the individual
footplate with a single fixing bolt. The
footplate is encapsulated in rubber to ensure
the sandals do not slide when secured.
If you wish to rotate or move either sandal,
simply loosen the knob (a), place in the
required position and then retighten the knob
securely.
9.6 Secondary Footplate
Angle
To set the angle to accommodate plantar-
flexion or dorsi-flexion, simply loosen the
Allen bolt located by the knee post to the
inside of the footplate (a), place in the
required position and then retighten the bolt
securely. 10° of flexion is accommodated in
each direction.
A
A