dB Technologies Moving Bedienungsanleitung Seite 39

7 BODYPACK TRANSMITTER MOVING D-B
7.1 DESCRIPTION
The MOVING D-B model is a bodypack transmitter that can be used for voice or musical
instruments such as wind instruments or electric guitars.
The MOVING D-B transmitter must always be combined with a MOVING D-R receiver, which
is used to configure the transmitter itself.
It may be combined with a lavalier microphone, with a headset or a cable for connection to
an electric guitar or bass, etc.
7.2 FUNCTIONS
1) Display
All the information about the device is shown on the display.
2) MINUS button
This button is used to decrease the gain on the XLR input connector (microphone).
3) PLUS button
This button is used to increase the gain on the XLR input connector (microphone).
4) Mini XLR connector
Connector for connecting an external accessory (microphone or cable for connecting a guitar).
5) LED status indicators
There are two LEDs that indicate the device status:
- the blue LED flashes to indicate that the device is on: one flash every 4 seconds - ON
normal, one flash per second MUTE mode;
- the red LED turns on to indicate a signal peak, if it remains on, adjust the volume using the
MINUS (2) or PLUS (3) buttons.
6) "MODE" Switch
Button for turning the system on/off This button is also used to activate/deactivate the MUTE status and to
scroll the status screens on the display.
ENGLISH
38