Front Panel Functions - dB Technologies Moving Bedienungsanleitung

ENGLISH
2 RECEIVER MOVING D-R
2.1 DESCRIPTION
The MOVING D-R receiver has two BNC connections for antennas, two line and microphone outputs and one
USB socket for connection from a remote computer.
The MOVING D-R receiver must always be combined with a MOVING D-H (handheld) or MOVING D-B
(bodypack) transmitter.
2.2

FRONT PANEL FUNCTIONS

1) "ON- " Push button
Enables or disables the device STAND-BY status. Hold down the button for a few seconds to enable
device stand-by, the display will turn off and a green LED on the panel will flash. Press it again for a few
seconds to reactivate the device.
2) Intensity indicators
This LED bar indicates the intensity of the audio signal between -15dB e +3dB;
3) Display
The display shows all information associated with device operation.
4) "Select" Knob
This control makes it possible to move, select and change the parameters in the pages of the displayed
menus.
Rotating the knob:
- makes it possible to move within the menu pages;
- makes it possible to change the selected parameters.
Pressing the knob (Push OK):
- makes it possible to select/confirm the parameters.
After 30 seconds of inactivity, the selection function is disabled and any unconfirmed changes will not be
saved.
5) Switch "Up"
This control allows to scroll up through the menu.
6) Switch "Down"
This control allows to scroll down through the menu.
7) Switch "Esc"
This control allows to exit from selection function of menu and restores the scrolling.
8) "I.R."
Communication device via IrDA (infrared) with mobile devices (handheld MOVING
MOVING D-B transmitters).
25
Moving D – digital wireless microphone system
D-M or bodypack