Herunterladen Inhalt Inhalt Diese Seite drucken

dB Technologies Moving Bedienungsanleitung Seite 34

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

ENGLISH
Turn off the transmitter and align its IRDA interface with that of the receiver, turn on the transmitter, making sure
the I.R. interfaces are aligned and maintain alignment during the entire procedure.
Follow the instructions that appear on the display until the operation is complete.
Once the update is complete, turn off the device, wait at least 5 seconds before turning it back on.
Note. Make sure to load the correct firmware on the device.
UPDATING THE BODYPACK TRANSMITTER FIRMWARE
Download firmware for bodypack transmitter MOVING D-B from internet website www.dbtechnologies.com from
MOVING D downloads section.
Updating the firmware does not change the device configuration.
File
Firmware Update
Turn off the transmitter and align its IRDA interface with that of the receiver, turn on the transmitter making sure
the I.R. interfaces are aligned and maintain alignment during the entire procedure.
Follow the instructions that appear on the display until the operation is complete.
Once the update is complete, turn off the device, wait at least 5 seconds before turning it back on.
Note. Make sure to load the correct firmware on the device.
4.5
SPECTRUM ANALIZER USE
View
Spectrum Analizer
The amplitude of the interval and the accuracy of the analysis of parameters can also be set from the computer.
It is also possible to save the analysis parameters to load them later. It is also possible to save the analyses that
were carried out and access them later.
4.6
TRANSMITTER'S PARAMETERS
View
Programming View
Exactly as in the version of the menu on board the receiver, in this section it is possible to change various
configuration parameters, such as:
the name that appears on the transmitter, the microphone capsule signal gain, the power of the transmitted
signal, the country, the frequency bank and the utilized channel.
Once these parameters have been changed, they must be sent to the transmitter via the I.R. interface as
described in paragraph 3.6.1.
33
Load (select the file with the TEX extension)
Moving D – digital wireless microphone system

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis