Mounting The Product On A Wall - Auriol IAN 285321 Bedienungs- Und Sicherheitshinweise

wall. If necessary, check the wall using a
suitable detector before you drill.
D rill a suitable hole in the wall using a drill.
P ush a dowel
a screw
Ensure that the screw
screwed into the dowel
H ang the indoor / outdoor thermometer
from the screw
1
the hanger
thermometer
Mounting the product
Q
on a wall
P ull the protective foil from one of the
sides of the self-adhesive pad
S tick the self-adhesive pad
back of the product.
P ull the protective foil from the other side
of the self-adhesive pad
T ake the product to the desired location
and press it carefully on to a wall or other
smooth surface.
16 GB
into the hole and screw
12
into the dowel
13
of the indoor / outdoor
11
on to the screw
1
12
is not completely
13
.
12
. To do this hook
13
14
.
14
.
.
13
.
14
on to the