Herunterladen Inhalt Inhalt Diese Seite drucken

Safety Instructions - Omnitronic VHF-Serie Bedienungsanleitung

Wireless mikrofonsystem
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

2 2 2 2 Safety Instructions

• Please read these operating instructions carefully before using the product. They contain
important information for the correct use of your product. Please keep them for future reference.
• The wireless microphone systems of the VHF-100 series consist of dynamic hand-held
microphones with integrated transmitter which serve for wireless signal transmission to the
receiving unit. The transmission range is approx. 30 m and depends on the local conditions.
The system is available with 1 channel or 2 channels and up to eight different transmission
frequencies. Due to the color code it can easily be recognized which microphone operates with
the respective receiver.
• These systems are intended for use in the EU. The operation in the 174-230 MHz frequency
range is license-free in Germany, however, is subject to restrictions in certain areas, AT, BE,
DK, GR, FR, IE, MT, NL, RO, ES, SE, GB (status as of 2018). Prior to use, make sure that the
desired frequencies are approved and legal in your country. Consult your national authority for
possible requirements.
• Only use the product according to the instructions given herein, to avoid accidental injury or
damage.
• We do not assume any liability for material and personal damage caused by improper use or
non-compliance with these operating instructions. In such cases, the warranty/guarantee will be
null and void.
• Unauthorized rebuilds or modifications of the product are not permitted for reasons of safety
and render the warranty invalid.
• To reduce the risk of electric shock, do not open any part of the product. Only connect the
product to a proper wall socket that complies with the product specification voltage. Run the
mains cable in such a way that it cannot be tripped over.
• This product is intended for indoor use only. Protect it from extreme temperatures, direct
sunlight, strong jolts, high humidity, moisture, flammable gases, vapors and solvents. The
recommended temperature range is -5 to +45 °C.
• Do not touch the power cord and connectors with wet hands as it may cause electric shock.
• Cleaning of the product is limited to the surface. Make sure that moisture does not come into
contact with any areas of the terminal connections or mains voltage control parts. Only wipe off
the product with a dry, lint-free cloth. Before cleaning, disconnect the product from the mains.
• If this product is no longer working properly or is visibly damaged, take it out of operation and
consult your local dealer. Do not attempt to repair the product yourself.
• Handle the product with care; it can be damaged by impacts, blows, or accidental falls, even
from a low height.
• This product is not a toy. Keep it out of the reach of children and pets. Do not leave packaging
material lying around carelessly.
• Do not try to short-circuit, recharge, disassemble or heat batteries (danger of explosion!).
Remove the batteries if the device is not used for a longer period of time. Damaged/leaking
batteries may cause harm to your skin–use safety gloves.
• Never remove the serial barcode from the device as this would make the guarantee void.
EU Declaration of Conformity
Steinigke Showtechnic GmbH hereby declares that the components of the VHF-100 series are in
compliance with the essential requirements and other relevant provisions of Directive
2014/53/EU. The complete Declaration of Conformity can be found at www.steinigke.de.
12 • EN

Werbung

Kapitel

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Vhf-101Vhf-102

Inhaltsverzeichnis