Headphones - Medion MD 30325 Anleitung

YPbPr
EXT-1
EXT-2
EXT-2 S

Headphones

Connect the headphones to the headphone connection
on when the headphones are connected. Regulate the volume level of the headphones by means
of the volume keys and the Switch Off Sound key. You can adjust the volume of the headphones in
the SOUND menu, HEADPHONE sub-menu, see page 21.
Y - PB - PR and AUDIO L - R (left - right): Component
inputs to connect devices to Component output, such as
camcorders, DVD players, decoders (e.g. satellite
receivers), etc. You will need a green/blue/red
Component cable for this connection for the video link,
as well as a red/white RCA cable for the audio link.
SCART input to connect devices such as video recorders,
DVD players, games consoles, decoders (e.g. satellite
receivers), etc.
You will need a SCART cable for this connection.
Same as EXT-1 .
You can select an output source in the FEATURE menu
(see page 22) for EXT-2 .
This SCART connection can also transmit better S-Video
image signals (for devices with an S-Video output, e.g.
camcorders). The S-Video picture signal is not, however,
supported by all external devices.
This connection is only intended for servicing purposes.
Do not try to connect a device to this.
Now connect the supplied mains cable.
. The main loudspeakers will remain
EN
29