Connecting Headphones - Medion MD 83825 Bedienungsanleitung

The charging process is complete when the battery display indicates that the battery is
fully charged after the USB cable has been removed from the USB port on the compu-
ter.
PLEASE NOTE!
The charging time increases if you operate the device while the battery is
charging.
The portable LCD TV automatically monitors the battery charge and displays the status
on the screen when it is turned on.
If there is not enough battery power, the message "BATTERY LOW! THE DEVICE
WILL BE SWITCHED OFF" appears in the display.
When the battery is fully charged, the message "BATTERY FULLY CHARGED" ap-
pears.
Fully charged

Connecting headphones

You can connect headphones to the device.
 Insert the stereo jack plug of the headphones into the headphone socket. You can
also use this socket to connect a cable (not supplied with the product) to the socket
on your stereo system.
WARNING!
Excessive pressure when using earphones and headphones can result
in damage to hearing and/or loss of hearing. Before pressing play, set
the volume to the lowest setting.
 Start playback at a low volume and increase the volume to a level that is comforta-
ble for you.
12
Charge battery!