Appendix - Yamaha A-S1100 Bedienungsanleitung

Appendix

Specifications
POWER SECTION
• Rated Output Power
[U.S.A, Canada, Taiwan, China, Korea, Australia, U.K. and
Europe models]
(L/R, 8 , 20 Hz to 20 kHz, 0.07% THD) .............. 90 W + 90 W
(L/R, 4 , 20 Hz to 20 kHz, 0.07% THD) .......... 150 W + 150 W
[Asia model]
(L/R, 8 , 20 Hz to 20 kHz, 0.07% THD) .............. 90 W + 90 W
(L/R, 6 , 20 Hz to 20 kHz, 0.07% THD) ...........110 W + 110 W
• Dynamic Power (IHF)
    W W
    W W
    W W
    W W
• Dynamic Headroom
(8  .................................................................................. 0.67 dB
• Maximum Output Power
[U.K. and Europe models only]
(1 kHz, 0.7% THD, 4 )...................................... 160 W + 160 W
• Maximum Effective Output Power (JEITA)
[Taiwan, China, Korea, Asia and U.K. models only]
(1 kHz, 10% THD, 8 )........................................ 120 W + 120 W
(1 kHz, 10% THD, 4 )........................................ 190 W + 190 W
• IEC Output Power [U.K. and Europe models only]
(1 kHz, 0.02% THD, 8 )......................................... 95 W + 95 W
• Power Bandwidth
(MAIN L/R, 0.1% THD, 45 W, 8 ) .................. 10 Hz to 50 kHz
• Damping Factor
(1 kHz, 8  ..............................................................250 or higher
• Maximum Input Signal Voltage
PHONO MM (1 kHz, 0.5% THD) ............................... 50 mVrms
PHONO MC (1 kHz, 0.5% THD) ............................... 2.2 mVrms
CD, etc. (1 kHz, 0.5% THD) ......................................... 2.80 Vrms
• Rated Output Voltage/Output Impedance
REC OUT ..................................................... 200 mVrms/1.5 k
PRE OUT ......................................................... 1.0 Vrms/1.5 k
• Frequency Response
CD, etc. (5 Hz to 100 kHz) ............................................ +0/3 dB
CD, etc. (20 Hz to 20 kHz) ......................................... +0/
• RIAA Equalization Deviation
PHONO MM .................................................................... ±0.5 dB
PHONO MC ..................................................................... ±0.5 dB
• Total Harmonic Distortion Plus Noise
PHONO MM to REC OUT
(20 Hz to 20 kHz, 2.8 Vrms ............................................ 0.005%
PHONO MC to REC OUT
(20 Hz to 20 kHz, 2.8 Vrms .............................................. 0.02%
CD, etc. to SPEAKERS OUT
(20 Hz to 20 kHz, 50 W/8 )........................................... 0.025%
• Signal to Noise Ratio (IHF-A Network)
PHONO MM (5 mVrms, Input shorted) .............................. 90 dB
PHONO MC (500 µVrms, Input shorted) ........................... 83 dB
CD, etc. (200 mVrms, Input shorted) ................................. 100 dB
• Residual Noise (IHF-A Network) .................................... 50 µVrms
24
En
CONTROL SECTION
• Input Sensitivity/Input Impedance
CD, etc. ............................................................ 200 mVrms/47 k
PHONO MM .................................................... 2.5 mVrms/47 k
PHONO MC ....................................................... 100 µVrms/50 
MAIN IN .............................................................. 1.0 Vrms/47 k
• Headphone Jack Rated Output Power
CD, etc. (1 kHz, 32 , 0.2% THD) ................... 25 mW + 25 mW
• Channel Separation
CD, etc. (Input, 5.1 k Terminated, 1 kHz/10 kHz)
...................................................................... 74/54 dB or higher
PHONO MM (Input shorted, 1 kHz/10 kHz, Vol.:30 dB)
....................................................................... 90/77 dB or higher
PHONO MC (Input shorted, 1 kHz/10 kHz, Vol.:30 dB)
....................................................................... 66/65 dB or higher
• Tone Control Characteristics
BASS
Boost/Cut (50 Hz) ............................................................. ±9 dB
Turnover Frequency ........................................................ 350 Hz
TREBLE
Boost/Cut (20 kHz) ........................................................... ±9 dB
Turnover Frequency........................................................ 3.5 kHz
GENERAL
• Power Supply
[U.S.A and Canada models] ............................... AC 120 V, 60 Hz
[Taiwan model]................................................... AC 110 V, 60 Hz
[China model] ..................................................... AC 220 V, 50 Hz
[Korea model]..................................................... AC 220 V, 60 Hz
[Australia model]................................................ AC 240 V, 50 Hz
[U.K. and Europe models].................................. AC 230 V, 50 Hz
[Asia model] ......................................... AC 220 - 240 V, 50/60 Hz
• Power Consumption
[Asia model] ......................................................................... 250 W
[Other models]..................................................................... 350 W
• Standby Power Consumption ................................................... 0.3 W
• Dimensions (W × H × D) ................................ 435 × 157 × 463 mm
• Weight................................................................... 23.3 kg (51.4 lbs)
* Specifications are subject to change without notice.

0.3 dB
(17-1/8" × 6-1/8" × 18-1/4")