Honda EG3600CL Bedienungsanleitung Seite 57

Four Wheel Kit Installation
1.Install the lock plate and four wheels on the wheel shaft using the
plain washers and split pins.
NOTE:
Install the front wheel shaft on the front side nearest the engine.
2.Install the wheel shaft assembly on the generator using eight 8×16
mm flange bolts.
TORQUE: 24–29 N·m (2.4–3.0 kgf·m, 17–22 lbf·ft)
8×16 mm FLANGE BOLT (8)
8 mm
FLANGE NUT (8)
FRONT WHEEL SHAFT
54
LOCK PLATE
LONGER
REAR WHEEL SHAFT
WHEEL (4)
20 mm PLAIN WASHER (5)
4×28 mm SPLIT PIN (4)
GENERATOR
SIDE