Honda EG3600CL Bedienungsanleitung Seite 49

5.Remove the sediment cup (see page 39), and then turn the fuel valve
lever to the ON position.
6.Allow the gasoline to drain completely, and then install the sediment
cup (see page 39).
FUEL VALVE LEVER
7.Change the engine oil (refer to page 37).
8.Remove the spark plug, and pour about a tablespoon of clean engine
oil into the cylinder. Turn the engine several revolutions slowly with
the recoil starter to distribute the oil, then reinstall the spark plug.
9.Slowly pull the starter grip until resistance is felt. At this point, the
piston is coming up on its compression stroke and both the intake
and exhaust valves are closed. Storing the engine in this position will
help to protect it from internal corrosion.
46
ON
ON
Align the notch on the starter pulley
with the hole at the top of recoil starter.