Installing/Removing Main Memory - Fujitsu D3654-A Kurzbeschreibung

Installing/removing main memory

Installing/removing main memory
Technical data
Technology
Total size
Module size
A current list of the memory modules recommended for this mainboard is available
on the Internet at: "http://www.fujitsu.com/fts/products".
At least one memory module must be installed. Memory modules with different
memory capacities can be combined.
Only unbuffered DDR4 memory modules without ECC may be used.
DDR4 memory modules must comply with the DDR4-2133, DDR4-2400
or DDR4-2666 specification.
DDR4-2600 memory modules are downward compatible and are
operated depending on the CPU.
The maximum system performance is ensured when identical memory
modules are used in Channel A and Channel B.
Depending on how the system is configured, the visible main memory can be reduced.
Channel A, Slot 2
Channel B, Slot 1
Slot to be used
Channel B, slot 1
Channel B, slot 2
The installation/removal is described in the "Basic information on mainboard" manual.
Fujitsu
DDR4-2133/2400/2666 MHz unbuffered SO-DIMM modules; 260-pin;
1.2 V; 64 bit, without ECC
2 to 32 GB DDR4
2, 4, 8 or 16 GB per module
Number of memory modules installed
1
x
English - 7
2
x
x
23