Amprobe TMD-55 Bedienungshandbuch Seite 17

Displays the current location of the read pointer within
a selected group. The arrow buttons on the overlay are
used for scrolling through the data and groups. Press the
smaller arrows " " or " " to step through the logged
data or groups one at a time. Press the larger arrows " "
or " " to step through the data or groups ten at a time.
To navigate the logged data and groups, press the overlay
" " button until GRP appears in the second display
panel. Then select the group using the arrows. Press the
" " button again until the "#" sign is displayed.
The location of the read pointer in the selected group will
be displayed. Use the arrows to scroll through the data.
Pressing the overlay " " button deactivates the read
data function.
When HOLD mode is selected, the thermometer holds the
present readings and stops all further measurements. To
activate the data hold mode, press the "
" " is displayed on the LCD. Pressing the "
key again cancels the function, and the instrument will
automatically resume measurements.
The " " function records the highest and lowest
value recorded, and it calculates the average reading, and
the differences of MAX to MIN. Press "
enter the MAX/MIN recording mode. The beeper emits a
tone when a new minimum or maximum measurement
is recorded. Press the "
through the current readings:
measurement recorded.
recorded. The difference of the highest and
the lowest measurement.
measurements.
This mode works in conjunction with the hold function,
pressing the " " key will stop the recording and
measurements (Previously recorded readings are not
10
" key, and
"
" key to
" key again to rotate
The highest
The lowest measurement
The average values of the