Activate The Alarm Function; Deactivate The Alarm; Deactivate The Alarm Function - Silvercrest IAN 285662 Bedienungs- Und Sicherheitshinweise

To apply a setting, wait until the time and the dot beside the alarm
type stop flashing.
Note: If you would prefer the „radio" to be your alarm, the last
programmed radio station and volume will be broadcast.
Note: Nightlight will be switched on automatically while the alarm
(alarm tone/radio) is ringing. It will be switched off automatically
while the alarm is turned off.

Activate the alarm function

To activate the alarm function, press the DOWN / AL1 button
UP / AL2 button
display next to the alarm (1 or 2) symbolizing the waking up function
with alarm ( ) or with the radio ( ).

Deactivate the alarm

To switch off the alarm for 24 hours, press the
while the alarm is ringing.
11
Note: The product automatically stops the alarm after an hour if
the alarm has not been switched off manually.

Deactivate the alarm function

Press the DOWN / AL1 button
edly until the dot beside the alarm type (
goes away.
90 GB/MT
briefly one or more times. A dot appears on the
13
or the UP / AL2 button
12
= Alarm,
or
12
/ FM / AM button
repeat-
13
= Radio)