Special Safety Instructions - Ayce 5914 Originalbetriebsanleitung

e) Maintain power tools. Check for misalignment or binding of moving parts,
breakage of parts and any other condition that may affect the power tools
operation. If damaged, have the power tool repaired before use. Many
accidents are caused by poorly maintained power tools.
f) Keep cutting tools sharp and clean. Properly maintained cutting tools with
sharp cutting edges are less likely to bind and are easier to control.
g) Use the power tool, accessories and tool bits etc. in accordance with these
instructions, taking into account the working conditions and the work to be
performed. Use of the power tool for operations different from those intended
could result in a hazardous situation.
5) Battery tool use and care
a) Ensure the switch is in the off position before inserting battery pack.
Inserting the battery pack into power tools that have the switch on invites
accidents.
b) Recharge only with the charger specified by the manufacturer. A charger
that is suitable for one type of battery pack may create a risk of fire when used
with another battery pack.
c) Use power tools only with specifically designated battery packs. Use of any
other battery packs may create a risk of injury and fire.
d) When battery pack is not in use, keep it away from other metal objects like
paper clips, coins, keys, nails, screws, or other small metal objects that
can make a connection from one terminal to another. Shorting the battery
terminals together may cause burns or a fire.
e) Under abusive conditions, liquid may be ejected from the battery; avoid
contact. If contact accidentally occurs, flush with water. If liquid contacts
eyes, additionally seek medical help. Liquid ejected from the battery may
cause irritation or burns.
6) Service
a) Have your power tool serviced by qualified repair person using only
identical replacement parts. This will ensure that the safety of the power tool
is maintained.

SPECIAL SAFETY INSTRUCTIONS

1. WARNING. Contact with or inhalation of harmful / toxic dusts arising from
sanding lead-based painted surfaces, woods and metals can endanger the
health of operator and bystanders.
2. All persons entering the work area must wear an approved mask specially
designed for protection against harmful / toxic dusts, in addition to using the
dust extraction facility, and keeping work area well ventilated.
3. Children and pregnant women must not enter the work area.
4. Do not eat, drink or smoke in the work area.
5. Any pre 1960 building may have paint containing lead on wood or metal
surfaces. If you suspect workpiece contains lead seek professional advice.
6. Some wood and wood type products especially MDF (Medium Density
Fiberboard) can produce dust that can be hazardous to your health. We
recommend the use of an approved face mask with replaceable filters when
using this machine in addition to using the dust extraction facility.
7. This tool is designed for single handed operation. Adopt a stable distance and
make sure that the mains cable is prevented from coming into contact with the
machine or getting caught up on other objects preventing completion of the
sanding pass.
8. Ensure that you have removed foreign objects such as nails and screws from
the workpiece before commencing sanding.
9. Don't use it for wet sanding, for dry sanding only.
10. Do not scrape wet or dampened materials (e.g. wallpaper) or on moist
surfaces. Penetration of water into the machine increases the risk of an
electric shock.
11. Hold power tools by their insulated gripping surfaces when performing an
operation where the cutting tool may contact hidden wiring or its own cord.
Contact with a "live" wire will make exposed metal parts of the tool "live" and
shock the operator.
12. Where possible, secure smaller workpieces to prevent them from moving
under the tool.
13. Do not force the tool; let the tool do the work at a reasonable speed.
Overloading will occur if too much pressure is applied and the motor slows
resulting in inefficient sanding and possible damage to the motor.
14. Only use application accessories in good condition. Do not use them if they are
torn or worn.
15. Do not touch the moving sanding sheet.
16. Do not treat the surface to be worked with solvent-containing fluids. Materials
being heated by the scraping can cause toxic vapors to develop.
17. Exercise extreme caution when handling the scraper accessory. The
accessory is very sharp; danger of injury.
18. Keep your hands away from the cutting area. Do not reach under the material
being cut.
The tool must be used only for its prescribed purpose. Any use other than those mentioned
in this Manual will be considered a case of misuse. The user and not the manufacturer
shall be liable for any damage or injury resulting from such cases of misuse.
96 | 97 GB