Noise/Vibration Information - Ayce 5914 Originalbetriebsanleitung

• Make sure that the charger lead is positioned where it will not be stepped on,
tripped over or otherwise subjected to damage or stress.
• Do not use an extension cord unless it is absolutely necessary. The use of
an improper extension cord could cause the risk of fire, electric shock or
electrocution.
• Do not use the charger if it has been subjected to a heavy knock, dropped or
otherwise damaged in any way. Take the charger to an authorized service centre
for a check or repair.
• Do not disassemble the charger. Take it to an authorized service centre when
service or repair is required. Incorrect re-assembly may result in the risk of fire,
electric shock or electrocution.
• To reduce the risk of an electric shock, unplug the charger from the power supply
before attempting to clean it. Removing the battery pack alone does not reduce the
risk.
• The charger is designed for use from a standard household electrical supply. Do
not attempt to connect the charger to a supply with a different voltage.
• The charger is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge,
unless they have been given supervision or instruction concerning use of the
charger by a person responsible for their safety.
• Children should be supervised to ensure that they do not play with the charger.
• Do not expose charger to rain or snow.
• Do not mount charger on wall or permanently affix charger to any surface. The
charger is intended to use on a flat, stable surface(i.e. table top, bench top)
• Never attempt to connect two chargers together.
• Never insert any objects into the charger's air vents. Electric shock or damage to
the battery charger may result.
• Disconnect the charger from the outlet before attempting any cleaning. This will
reduce the risk of electric shock. Removing the battery pack will not reduce this
risk.
• Never recharger a fully charged battery cartridge.
• Do not charge non-rechargeable batteries.

NOISE/VIBRATION INFORMATION

Measured sound values determined according to EN 60745.
WEAR HEARING PROTECTION!
Vibration total values (triax vector sum) determined according to EN 60745: The
vibration emission level given in this information sheet has been measured in
accordance with a standardized test given in EN 60745 and may be used to compare
one tool with another. It may be used for a preliminary assessment of exposure.
The declared vibration emission level represents the main applications of the tool.
However if the tool is used for different applications, with different accessories or
poorly maintained, the vibration emission may differ. This may significantly increase
the exposure level over the total working period. An estimation of the level of exposure
to vibration should also take into account the times when the tool is switched off or
when it is running but not actually doing the job. This may significantly reduce the
exposure level over the total working period. Identify additional safety measures to
protect the operator from the effects of vibration such as: maintain the tool and the
accessories, keep the hands warm, organization of work patterns.
100 | 101 GB