Technoflex RABBIT Gebrauchsanweisung Seite 26

1
B
OPERA TION
1.14 Troubleshooting
SYMPTOM
Motor does not start
PROBABLE CAUSE
1.- No power in the line.
2.- Problem in the switch.
3.- Finished brushes
COUNTERMEASURE
1.- Checking.
2.- Replace.
3.- Replace.
2. - Defect in the transmission or 12. - Checking if it is the cause
vibrant needle. and repair.
!"he motor operates well, bul' 1.- Grid passes obstructed air.
It warm.
1.- Faulty bearings.
The motor upon revolving'
makes noise. 12.- The rotor scraps.
1.- Cleaning.
1.- Replace.
2.- Bearings replace.
The motor operates s/owers
of the normal and it warm.
1.- Bearings blocked in the 1.- Checking the place of the
needle vibrant or in the mishap and replace
motor. bearings.
18-11
2.- It lower tension in the line.
2.- Checking the external
tension, the lenght and
section produce
a
gotten
off tension and danger of
blaze.
INGLÉS