Safety Notes - Technoflex Rabbit Gebrauchsanweisung

1.1 Safety Notes
OPERATION
18
This manual contains CAUTlONS and WARNINGS which must be followed to prevent the possibility
of improper service, damaged to the equipment, or personal injury. Read and follow all the
CAUTlONS and WARNINGS included in this instructions manual.
WARNING: Warnings warn of conditions or practices which
could lead to personal injury.
1.2 Warning and Safety Instructions
¡l!\
WARNING
Read Alllnstructions!
When using electric tools, basic safety precautions should always be followed, to reduce the
risk of fire, electric shock, and personal injury.
Guard against electric shock!
1.Never operate motor with damaged or worn
electrical cords! When using and extension
cord be sure to use one heavy enough to carry
the current load. See Table
1.8-1
for correct
cable size to use.
2.Prevent body contact with grounded surfaces,
such as pipes, metal railings, radiators and
metal ductwork.
3. When motor is used outdoors, use only
extension cords intended for and marked for
outdoor use.
4.Always keep power cord away from heat, oil
and sharp edges which can damage it.
5.Make certain motor is in good working order
and properly
arounded
before starting, as
well as the
connection plua
where this will
be connected.
6.ln any case it will be able to modify the
structure of the connector, it can cause
electric shocks.
7. They won't be able to be used lower any
concept adapters that they are not
homologated, faulty or lacking
around
connection
or of
a
capacity (A.) inferior to
the suitable one in this manual ..
INGLÉS
Save these instructions!
18-2