Design; Connections - GOK VSR 0126 Montage- Und Bediensungsanleitung

Check regularly that the sieve is not blocked. A blocked sieve may increase or
decrease outlet pressures. Clean or replace as required.

DESIGN

Inlet connection
Outlet connection
Pressure gauge (optional)
Cap, non-adjustable

CONNECTIONS

Inlet,
optional
4 / 10
Optional insect protection device
Insert in the breather on the 8 mm vent socket or screw into the female
thread G 1/8.
Trading name and dimensions
acc. to standard
Cylindrical female thread
• G.37 = F G 1/4, G 3/8, G 1/2, G 3/4 or G 1
• For a screw-in connector with O-ring
Italian connection
• with rubber gasket and cap nut
• G.1 = Thread W 20 x 1/14 ÜM
US POL connection
• with sealing fitting and retaining screw
• G.9 = Thread 0.880-14 NGO lh
Compression fitting
• G.22 = compr. fit 12, compr. fit 15,
compr. fit 18, compr. fit 22, compr. fit 28 or
compr. fit 35
Medium pressure regulator type VSR 0126
Handwheel, adjustable
Set screw in handwheel
Opening for insect protection device
(optional)
Installation notes
Spanner size 25
Hexagonal
Spanner size 24
Hexagonal
More information
can be obtained on
the Internet or on
request.
part no. 01 267 50 c