Helios EUR EC Montage- Und Betriebsvorschrift Seite 177

Installation and Operating Specification EUR EC
Example: Assignment of inputs for temperature sensors
1
AI1 (26.8°C)
AI2 (16.8°C, 5E)
AI3 (7.8°C, 15E)
AI4 (OFF)
AI5 (OFF)
2
AI1 AI2
E1
1 Overview display of virtual inputs "AI1-AI6" with display of actual values and programmed functions
2 Assignment of actual input "E1" on MODBUS master to virtual input "AI1"
3 Assignment of actual input "E2" on MODBUS master to virtual input "AI2"
4 Assignment of actual input "E1" on MODBUS slave to virtual input "AI3"
Assignment of IOs and display of designations
With the factory default assignment, the designations of the inputs and outputs in the display
correspond to the connection designations (see circuit board and connection diagram imprint).
If you make a different assignment, e.g. assigning the input "E2" instead of the previous hardware
input "E1" under "AI1" (analog input 1), the display and setting is still under "E1". In other words, the
designation of the connection and the designation in the display no longer match.
Example of possible assignment for analog input AI1 and AI2
Factory assignment
The actual input "E1" is assigned to the virtual input
"AI1".
The actual input "E2" is assigned to the virtual input
"AI2".
1 Actual value display for "E1" and "E2" in Info menu group
2 Overview display of virtual inputs "AI1-AI6" with display of
actual values and programmed functions
3 Assignment of signal at "E1" to analog input "AI1"
4 Assignment of signal at "E2" to analog input "AI2"
L-BAL-E274-GB 1815 Index 002
MODBUS Master
3
4
AI3
E2
E1 E2
Sensor 1 Sensor 2
1A
MODBUS
1B
Exchanged assignment
The actual input "E2" is assigned to the virtual input
"AI1".
The actual input "E1" is assigned to the virtual input
"AI2".
1 Actual value display for "E1" and "E2" in Info menu group
2 Overview display of virtual inputs "AI1-AI6" with display of
actual values and programmed functions
3 Assignment of signal at "E2" to analog input "AI1"
4 Assignment of signal at "E1" to analog input "AI2"
Part.-No.
60/116
Programming
MODBUS Slave
A
B
E1
13.09.2016
Sensor 3 v_mod_master_io_mapping.vsd