How To Rackmount The Sun Enterprise 250 Server; Before You Begin - Sun Enterprise 250 Montagehandbuch

1 How to Rackmount the
Sun Enterprise 250 Server
This guide shows you how to install a Sun Enterprise™ 250 server into a Sun™
Enterprise Expansion Cabinet, or other EIA-compliant rack enclosure.
To rackmount a server, you need to:
Prepare the rack enclosure—page 1-7
Prepare the server chassis—page 1-7
Install the slide assemblies in the rack enclosure—page 1-18
Install the server into the rack enclosure—page 1-25

Before You Begin

Read the rack enclosure requirements—page 1-3
Verify the rackmounting kit contents—page 1-5
Locate a Phillips #2 screwdriver and a flat-blade screwdriver.
Read the Cautions that follow.
Cautions
Caution – Install the chassis as low as possible in the rack enclosure. For best
!
stability, do not install the chassis above equipment that weighs less than it does.
1-1