Sun Enterprise 250 Montagehandbuch Seite 17

Installing the Rack-Ready Side Access Panel
1. Carefully turn the chassis onto its right side.
Enlist the help of another person to accomplish this safely.
Do not lift the chassis using the plastic panels at the front of the chassis. Place the
system on a solid surface that spaces the unit about 2 inches (5 cm) off the floor; for
example, use a pair of wooden boards. Do not allow any of the weight to rest on the
plastic panels at the front of the chassis.
2. Locate the rack-ready side access panel that you received with your rackmounting
kit.
3. Place the panel on the chassis and slide it toward the front of the system,
as shown.
4. Tighten the two captive screws that secure the panel to the rear of the chassis.
1-12 Sun Enterprise 250 Server Rackmounting Guide • February 1999