Multiple-Device System - Siemens FDV241 Inbetriebnahmeanleitung

Setup
9.5.2

Multiple-device system

26
Building Technologies
Fire Safety & Security Products
Connect the client PC to the power supply.
7.
Start the client PC.
8.
Set the IP address of the client PC. See Section 9.7: Setting the IP address of
9.
the client PC.
10. Install the software and configure it. See Section 10: Software and
Section 11: Configuration.
11. Connect the Video Fire Controller to the FDnet (9).
12. Configure the device on the fire control panel. See Section 12: Configuring
FDV241 on the fire control panel.
More detailed information on the configuration and setup of the fire control panel can be found in the
configuration and user manual for the fire control panel.
1 c amera
FDV241
1 c amera
FDV241
•
•
•
1 camera
FDV241
Fig. 11 Multiple-device system
Fig. 12 Connections on the Video Fire Controller
Network switch
Client PC
FDnet
11.2008