Siemens FDV241 Inbetriebnahmeanleitung Seite 60

Setup
24
Building Technologies
Fire Safety & Security Products
13. Configure the device on the fire control panel. See Section 12: Configuring
FDV241 on the fire control panel.
More detailed information on the configuration and setup of the fire control panel can be found in the
configuration and user manual for the fire control panel.
Replaying or archiving recordings
If you want to play or export recorded sequences, the client PC must be connected
to the Video Fire Controller again:
Connect the client PC to the Video Fire Controller (6) using a patch cable.
1.
Play the recorded sequences using the SISTORE SX/CX Client software or
2.
archive them. Further information on this can be found in the SISTORE
SX/CX user manual.
Disconnect the client PC from the Video Fire Controller.
3.
11.2008