Setup; Opening/Closing The Device - Siemens FDV241 Inbetriebnahmeanleitung

9

Setup

9.1

Opening/closing the device

Building Technologies
Fire Safety & Security Products
Fig. 4 Video Fire Controller – Screws on the front side of the device
Opening the device
Remove the screws on the front side of the device.
1.
Remove the housing cover.
2.
Closing the device
Damage to the device
Risk of damage when closing the device.
IMPORTANT
When closing the device make sure not to damage the extension pipes in the
housing cover or the electronic components inside the device.
Place the housing cover on the device.
1.
Tighten the screws on the front side of the device.
2.
Setup
19
11.2008