Sony PXW-X180 Bedienungsanleitung Seite 42

System
Menu items
Network
Streaming
(PXW-X180 only)
Settings for the
streaming and
respective display
items
GB
20
Sub items and setting values
Regenerate Password
Execute / Cancel
Setting
Preset Select
Preset1
Size (HD Auto / 1280 × 720 /
640 × 360 / 480 × 270)
Bit Rate (9Mbps / 6Mbps /
3Mbps / 2Mbps / 1Mbps /
0.5Mbps)
Type (MPEG-2 TS/UDP /
MPEG-2 TS/RTP)
Destination Address (Character
string. 0.0.0.0)
Destination Port (1 to 65545.
1234)
Preset2
Preset3
Contents
Regenerates the password.
Execute: Executes this function.
Turn the function to transmit streaming on/off.
Notes
• This setting turns off when you turn the power on again.
• When you turn the streaming on, the monitoring function
is not available.
Select the preset of the streaming.
Sets the image size for the streaming.
When you select "HD Auto," the size is set to "1920 ×
1080" or "1280 × 720" according to the setting of recording
format recorded in the SxS memory card or the format of a
clip to be played back.
Set the bit rate of the video for streaming. Selectable bit rate
differs depending on the setting value of "Size."
Notes
• Data may leak because the video/audio data is transferred
via Internet. Be sure that the transmission destination can
receive the streaming data.
• The data may be missent to an unintended party because
of setting mistakes of the address.
• Not all frames may be played depending on the status of
the network.
• The picture quality may deteriorate in scenes with
excessive motion.
• Not all frames may be played when the stream is set to a
large size with a small bit rate. To reduce this, select a
smaller size in "Size."
• When "Bit Rate" (page 15) of the proxy format setting is
set to "9Mbps (VBR)":
—"Bit Rate" of the stream setting cannot be set to a
setting higher than "6Mbps."
—When you select a preset of which "Bit Rate" is set to
a setting higher than "6Mbps," "Bit Rate" of the
streaming setting is changed to "3Mbps"
automatically.
Selects the type of streaming video.
Input the address of the server for the streaming
transmission.
Input the port number that is used for streaming of the
destination server.