Sony PXW-X180 Bedienungsanleitung Seite 38

Wireless LAN settings (Station
Settings)
You can perform the settings for connecting to a
wireless LAN.
"Host Name"
Displays the host name of the camcorder. (Cannot
be changed).
"SSID"
Displays the SSID that is selected at "Access
Point."
"Key"
Input the password for the access point.
"DHCP"
Set the DHCP setting.
When you set to "On," the IP address is assigned
to the camcorder automatically.
To assign the IP address to the camcorder
manually, set to "Off."
"IP Address"
Input the IP address of the camcorder. This
setting is available only when "DHCP" is set to
"Off."
"Subnet mask"
Input the subnet mask of the camcorder. This
setting is available only when "DHCP" is set to
"Off."
"Gateway"
Input the default gateway for the access point.
This setting is available only when "DHCP" is set
to "Off."
"DNS Auto"
Set the DNS automatic acquisition function.
"Primary DNS Server"
Input the primary DNS server for the access
point. This setting is available only when "DNS
Auto" is set to "Off."
When this setting is set to "Off," acquires it
manually.
GB
16
"Secondary DNS Server"
Input the secondary DNS server for the access
point. This setting is available only when "DNS
Auto" is set to "Off."
"Submit"
Confirms the wireless LAN settings.
To connect to the access point in the station
mode without the WPS function
1
Connect the device to the camcorder in
the access point mode (page 5).
2
Set the items on the "Station Settings"
screen.
Perform settings in accordance with the
access point settings.
For details about the access point settings,
refer to the operating instructions of the
access point.
3
Touch "Submit."
The set items are confirmed.
4
Set the camcorder's wireless LAN
operation mode to the Wi-Fi station
mode by setting "Setting" in "Network"
of the System menu to "Wi-Fi Station."
The camcorder starts connecting in the
station mode. Access the camcorder from the
device by performing procedure from step 7
of "Connecting to the access point with the
WPS function" (page 7).
Checking the wireless LAN settings
Display the screen for checking the wireless LAN
settings by touching "Wireless LAN" > "Status."
The displayed items differ depending on the
wireless LAN mode of the camcorder.
Access point mode