Eu Declaration Of Conformity - Gude W 520 / 5,5 T UG Originalbetriebsanleitung

Using your left hand, press the electric motor button to full
extent and control the operating lever with your right hand.
The traversing table is moving forward, pressing the log
through the splitting knife.
Caution: If the button has not been pressed to full
extent, the switch contact could get damaged.
If the log is not to be split immediately, do not hold the
slide valve pressed. Pull the log slide valve back and try
again. A small log may also be difficult to split if knotty and
fibrous. Wider logs with regular fibrous wood are not
difficult to split. If wood is too hard, the log needs to be
processed by a special machine to prevent damage to the
appliance.
Repeat the operating step with wood cut into smaller
pieces.
The log splitter needs to be unplugged after finishing work.
The cable must not be pulled when doing so.
Caution: The engine may switch off due to overheating
after several hours of operation or when splitting big and
hard logs. In such a case, let the appliance cool down for
at least app. 15 minutes and then continue with the work.

EU DECLARATION OF CONFORMITY

We,
Güde GmbH & Co. KG
Birkichstrasse 6
D-74549 Wolpertshausen
Germany
herewith declare that the following appliance complies with
the appropriate basic safety and health requirements of
the EU Directives based on its design and type, as brought
into circulation by us
.
In case of alternation of the machine, not agreed
upon by us, this declaration will lose its validity.
Machine description:
W 520 / 5.5 T UG LOG SPLITTER
Article No.
#94711
Applicable EU Directives:
2006/42 EG
2006/95 EG
2004/108 EG
Applicable harmonised standards:
EN 62233:2008
EN 60335-1:2002+A11,A1:04+A12,A2:06+A13:08
EN 60335-1:2002+FprAF:09
EN 60204-1:2006+A1:09
EN 609-1:1999+A1:03+A2:09
EN 55014-1:2006
EN 55014-2:1997/+A1:2001/+A2:2008
EN 61000-3-2:2006
EN 61000-3-3:2008
Place of certification:
Intertek Testing Services Shanghai,
Building No. 86, 1198 Qinzhou Road (North), Shanghai
200233 China
Reference No.
06SHW0188-04
Date/authorised signature: 20 Sep, 2010
Title of signatory: Managing Director
Mr Arnold
Technical documentation:
Guarantee
The guarantee exclusively applies to material or
manufacturing defects. The original proof of purchase with
the purchase date must be submitted when lodging a claim
in the guarantee period.
The guarantee does not include any unauthorised use,
e.g. appliance overloading, violent use, damage by a third
party or foreign item. The failure to follow the Operating
Instructions and assembly instructions and common wear
and tear are not covered by the guarantee either.
Residual risks and protective measures
Electrical residual risks:
Risk Description
Direct Cable could be
electrical cut off,
contact entangled or
damaged by
mechanical
parts.
Mechanical residual risks:
Risk Description
Getting When splitting,
jammed parts of body
may get
jammed or
amputated by
the traversing
table
movement.
Risk of log
getting stuck.
Please be sure
to know the log
is under
significant
pressure when
being released,
which may
cause your
fingers to get
jammed in a
gap.
When splitting,
parts of body
Cutting may get
jammed or
amputated by
the traversing
table
movement.
.
Other risks
Risk Description
Thrown-off Thrown-off
items and wood debris or
spraying spraying
liquids hydraulic oil
may cause
injury.
Neglecting ergonomic principles
Risk Description
Inadequate Inappropriate
local lighting lighting/poor
visibility
13
J. Bürkle FBL; QS
Protective measure(s)
Work only with a connection
with safety switch against
stray current (FI).
Protective measure(s)
Two-handed safety handling
A log that has got stuck must
only be knocked out. Watch
out for a falling log as your
feet could get injured.
Wear protective glasses,
gloves, closefitting winter
clothes and solid shoes with a
rough sole when working.
Protective measure(s)
Wear protective glasses,
gloves, closefitting winter
clothes and solid shoes with a
rough sole when working.
Protective measure(s)
Appropriate lighting or good
visibility must always be
provided when working with