Technical Data; Specified Conditions Of Use - Gude DHH 1050/8 TCS Originalbetriebsanleitung

Technical Data

Log splitter
Art. No ....................................................................01963/01999 ...........................02004 ........................ 02040 .......................01962
Service connection .............................400 Volt~50 Hz .........400 Volt~50 Hz ...... 400 Volt~50 Hz ..........400 V~50 Hz
Motor output, S6/40%........................................3,5 kW ............................. 3 kW ....................... 4,0 kW ......................... 4 kW
Engine speed .................................................1400 min
Max. splitting pressure ...............................................8 t ...............................10 t ............................. 10 t ........................... 12 t
Max. splitting uplift ........................................ 490 mm .......................490 mm .................... 510 mm ...................550 mm
Forward speed ......................................0,04 - 0,05 m/s .......... 0,03 - 0,04 m/s ....................0,03 m/s ..................0,03 m/s
Reverse speed .......................................0,10 - 0,12 m/s ...................... 0,16 m/s ....................0,15 m/s ..................0,15 m/s
Weight ......................................................................108 kg ..........................132 kg ....................... 177 kg ......................182 kg
max. Split material lengths .........................1040 mm .................... 1050 mm ..................1350 mm ................1350 mm
Max. splitting diameter .................................. 300 mm ........................400mm ..................... 400mm ...................400 mm
Splitting post ..........................................100 x 100 mm ...........120 x 120 mm .........120 x 120 mm .......120 x 120 mm
Table size ...................................................300 x 310 mm ...........380 x 300 mm .........380 x 300 mm ........380 x 300mm
Hydraulics tank (HLP 46) ........................................3,4 l ...................................5 l ................................ 8 l .............................. 8 l
Max. hydraulic pressure ...................................210 bar .......................210 bar ......................210 bar ....................250 bar
Noise and Vibration Information
Sound pressure level L
Sound power level L
WA
Vibration emission value a
h
1) Uncertainty K = 3 db (A)
WARNING The vibration emission level will vary because of the ways in which a power tool can be used and
may increase above the level given in this information sheet.
The vibration emission level may be used to compare one tool with another.
It may be used for a preliminary assessment of exposure.
An accurate estimate of the vibratory load should also take into account the times when the tool is shut down or
when it is running but not actually in use. This may significantly reduce the vibratory load over the total working
period.
Identify additional safety measures to protect the operator from the effects of vibration such as: maintain the
tool and the accessories, keep the hands warm, organisation of work patterns.
Read and understand the
operating instructions before
using the appliance. Abide by all
the safety measures stated in the service manual. Act
responsibly toward third parties.
In case of any doubts about connection and
operation refer please to our customer center
DHH 1050/8 TC DHH 1050/10 TP BASIC 10T/DTS DHH 1250/12 T
-1
1)
..........................69,9 dB (A) ..................69,9 dB (A) ............... 69,9 dB (A) ..............69,9 dB (A)
PA
1) ...............................85,2 dB (A) ..................85,2 dB (A) ............... 85,2 dB (A) ..............85,2 dB (A)
......................................2,5 m/s
.................. 2820 min -1 ................1400 min
2 2
....................... 2,5 m/s .....................2,5 m/s

Specified Conditions Of Use

The wood splitter has only been designed to split
wood in the fibre direction. Respecting technical
data and safety precautions.
When splitting, it is essential to make sure the split
wood only contacts the checkered sheet of the
bottom plate or the checkered sheet of the splitting
desk.
It is essential to follow instructions for installation,
operation, repairs, etc. to prevent hazards and
damage.
Please do not forget that this machine, as designed,
is not intended for industrial use.
ENGLISH
27
-1 ..............1440 min -1
2 2
...................2,5 m/s