Analysing Measurements - Silvercrest IAN 297929 Gebrauchsanleitung

Option 2: After measurements are taken, the data will automatically be sent to the app.
„SYNC" will flash on the display .
1
The device will attempt to connect to the app for 10 seconds.
Once connected, „SYNC" will stop flashing.
All stored measurements will be automatically transferred to the app. The pulse oximeter
will then automatically switch off.
If Bluetooth ® is deactivated ( OFF), the notification OFF will be displayed after your
measurement has been carried out.

Analysing Measurements

The following table for assessing measurements does NOT apply to
persons with certain pre-existing conditions (e.g. asthma, heart failure, respiratory disor-
ders) and in altitudes over 1500 metres.
If you have a pre-existing condition, always consult your physician to analyse your measure-
ments.
30 GB