Glp And Gmp Data - OHAUS Scout STX Serie Bedienungsanleitung

EN-36
Note: If security switch is set to locked, the print Output-Stable setting is not reset.
A TAB delimiter is added between each data output.

5.2.6 GLP and GMP Data

Enter this menu to set the Good laboratory Practices (GLP) data.
Header Balance Name
GLP Data Sub-menu
Header
Enables the printing of GLP headings. There are up to 5 headings
available.
Set the balance identification.
Set the user identification.
Project Name
Enter this menu to set the Project identification.
Footer
Enables the printing of GLP headings. There are 2 headings available.
Find Quality Products Online at:
Alternate Tare Command
Set the alternate command character for Tare.
Settings of A to Z are available. The default setting is empty, except
P&Z.
Alternate Zero Command
Set the alternate command character for Zero.
Settings of A to Z are available. The default setting is empty, except
P&T.
Print Settings Menu:
User Name
Alphanumeric settings up to 25 characters are
available for each Header setting. .
Balance Name
Alphanumeric settings up to 25 characters are available.
The default setting is blank.
User Name
Alphanumeric settings up to 25 characters are available.
The default setting is Scout.
Alphanumeric settings up to 25 characters are available.
The default setting is blank.
Alphanumeric settings up to 25 characters are
available for each Header setting. .
GlobalTestSupply
www.
Project Name Footer
.com
STX
sales@GlobalTestSupply.com