OHAUS Scout STX Serie Bedienungsanleitung Seite 36

STX
Set the printing criteria.
Set the printing criteria.
Note: If language selection is set to Chinese, Japanese or Korean, these options
shall match the actual peripheral device.
Auto Print
Set the automatic printing functionality.
When ON Stability is selected, set the conditions for printing.
When INTERVAL is selected, set the time interval using the numeric
keypad.
Print Content
Enter this sub-menu to define the content of the printed data.
See details below:
Find Quality Products Online at:
Single Header Only
OFF = Headers will be printed for every print requirement
= Headers will be printed once a day
ON
Print Options*
Printer = Print data to a printer
= Print data to a PC
PC
OFF
ON Stability
Interval (seconds) = printing occurs at the defined time interval.
Continuous
Load
Load and Zero
Settings of 1 to 3600 seconds are available.
GlobalTestSupply
www.
= disabled
= printing occurs each time the stability criteria are
met.
= printing occurs continuously.
= Prints when the displayed load is stable.
= Prints when the displayed load or zero reading is
stable.
.com
sales@GlobalTestSupply.com
EN-33