Flex L3309-115 Bedienungsanleitung Seite 16

n Note the dimensions of the grinding tools.
The hole diameter must match the
threaded flange (2). Do not use any
adapters or reducers.
n Store and handle grinding tools
according to the manufacturer's
instructions.
n Before using the machine, check that
the installed tools have been secured
according to the manufacturer's
instructions.
n Before using the machine, check that
the grinding tools have been installed
and secured correctly. Switch on the
machine at no load for 30 seconds!
Interrupt the test run immediately
if violent vibrations occur or other
damage is established. Check the
machine to determine the cause.
n Keep hands away from rotating grinding
tools.
n Use grinding tools for the intended
purpose only. Never subject cutting-off
wheels to lateral pressure or use for
rough-grinding.
n Do not cut workpieces which have
a diameter larger than the maximum
cutting depth of the angle grinder.
n Switch on the angle grinder before
guiding it towards the workpiece.
n Do not load the angle grinder to such
an extent that it stops.
n Before putting the angle grinder down,
switch it off and wait until it stops.
n Protect persons and flammable objects
from flying sparks. Set the guard (3)
correctly.
n Do not grind or cut materials which
release hazardous substances
(e.g. asbestos).
16
Angle grinder L3309-115/125/FR, L3410FR/VR, L3325FR
n Never grind or cut light metals which
n If angle grinders are used outdoors
n Use only extension cables permitted
n Mark the angle grinder with adhesive
n The mains voltage and the voltage
n Do not press the spindle lock (5) until
have a magnesium content greater than
80 %. Risk of fire!
or are exposed to extreme metal dusts,
connect via a residual-current-operated
circuit-breaker (tripping current
maximum 30 mA).
for outdoor use.
labels only. Do not drill any holes into
the housing.
Damage to property!
specifications on the rating plate (7)
must correspond.
the grinding tool stops.