For Your Safety; Intended Use; Safety Instructions - Flex L3309-115 Bedienungsanleitung

Angle grinder L3309-115/125/FR, L3410FR/VR, L3325FR

For your safety

Danger!
Before using the angle grinder, please read
and follow:
– these operating instructions,
– the "General safety instructions" on the
handling of power tools in the enclosed
booklet (leaflet-no. 315.915/04.04),
– the currently valid site rules and the
regulations for the prevention of
accidents.
This angle grinder is state of the art and has
been constructed in accordance with the
acknowledged safety regulations.
Nevertheless, when in use, the power tool
may be a danger to life and limb of the user
or a third party, or the power tool or other
property may be damaged. The angle
grinder may be operated only if it is
– used as intended,
– in perfect working order.
Faults which impair safety must be repaired
immediately.
Noise
Caution
Wear ear protection at a sound pressure
above 85 dB(A).
Measured according to EN 50144:
:
Sound pressure L
pA
Sound power L
WA
dB(A) 84
dB(A) 97
Vibration
Weighted effective value of acceleration
according to EN 50144: <5 m/s²

Intended use

This angle grinder
– is designed for industrial applications,
– is designed for dry grinding and cutting
metal and stone,
– is restricted to polishing surfaces
(only appliances with speed pre-
selection and with appropriate tool),
– is designed for use with grinding tools
and accessories which are indicated in
this manual or recommended by the
manufacturer and which are permitted to
run at a circumferential speed of 80 m/s.
Not permitted are e.g. chain cutting wheels,
saw blades.

Safety instructions

Danger!
n When using the power tool,
wear protective equipment:
Goggles, dust mask, ear protection,
protective gloves, sturdy shoes.
If required, also wear an apron!
n Always guide the angle grinder with both
hands. The handle (4) must be attached!
n Do not clamp the angle grinder in a vice.
n Always lay the power cord (8) to the rear
away from the angle grinder.
n Clamp the workpiece if it is not securely
positioned by its own weight.
n Use only grinding tools which have
a permitted speed at least as high as
the nominal speed of the angle grinder.
15