Wall Cleaning; Shutting Down; Care - Kärcher FRV 30 ME Bedienungsanleitung

Wall cleaning

 Unscrew the covering nut.
 Remove joint.
 Attach hand spray gun.
 Tighten the union nut.
Caution
A strong wastewater jet will emerge from
the hose connection. Do not use the sur-
face cleaner without a hose.
 Insert the hose into the hose connection
and secure by rotating.
 Route the other end of the hose to a
drain.
 Hold the appliance at the handle while
cleaning the wall.
 Guide the surface cleaner so that it re-
mains close to the surface to be
cleaned.

Shutting down

 After operation with hot water, operate
the surface cleaner with cold water for
two minutes to cool it down.
 If necessary, rinse the surface cleaner
and the suction hose with clear water.
 Protect the appliance against frost.
 Do not allow bristles to deform during
storage.
Note: In order to ensure a good suction re-
sult, please do not place the surface clean-
er FRV 30 onto the bristle crown after use.
To protect the brush bar from damages,
you can also remove it while storing the
FRV 30.
 Rinse the steering rollers with clear wa-
ter after use and spray with creeping oil
after they have dried.
– 4
EN

Care

11