Maintenance - Knick Protos 3400 Betriebsanleitung

Maintenance

Analog controller, digital controller
Note: HOLD mode active
Menu Display
Menu selection
Return to meas
Analog Controller IV1/IV2
3-way mixing valve
Output IV1: -100...+100%
Man. controller output
Return
Digital Controller KV1/KV2
Contact KV1: 0...+100%
Contact KV2: -100...0%
Man. controller output
Return
PID 3400(X)-121
7.10 pH
22.3 °C
Select: [enter]
Lingua
7.10 pH
22.3 °C
-048.8%
7.10 pH
22.3 °C
-048.8%
Maintenance
Open Maintenance
From the measuring mode:
Press menu key to select menu.
Select maintenance using arrow keys,
confirm using enter.
Then select Module PID.
Analog Controller IV1/IV2
The analog controller is configured
during parameter setting.
The default setting is shown on the
Load
display.
For testing purposes, the controller
output can be entered manually.
Digital Controller KV1/KV2
The relay contacts (KV1/KV2) are
configured during parameter setting
(Pg ).
For testing purposes, the controller
output can be entered manually.
31