Power Cable; Connecting Cable 7-Pole; Connection Fibre Cable And Fibre Optic - KLEIBER 217 R - LWL Betriebsanleitung

5 Technical Description
Element
1 Connection fibre optics cable
2 Fuse

3 Power cable

4 Connecting cable
5.4 Power cable
The power cable is fixed at the panel instrument case. The contacts are arranged as follows:
Color Meaning
blue N
brown L1
green / yellow PE

5.5 Connecting cable 7-pole

The connecting cable is fixed at the panel instrument case. The contacts are arranged as follows:
Color Meaning
white analog output 0 / 4 . . . 20 mA
brown ground output
green for output controller, when used controller 702043 connected at connection 9 (relay contact
output 1)
yellow for output controller, when used controller 702043 connected at connection 10 (relay con-
tact output 1)
grey for output controller, when used controller 702043 connected at connection 12 (relay con-
tact output 2)
pink for output controller, when used controller 702043 connected at connection 13 (relay con-
tact output 2)
green / yellow PE
5.6 Connection fibre cable and fibre optic
The plug to connect the instrument with the fibre cable is at the front side of the unit. The colored end of the
fibre cable is connected there. The other end (black) is for the connection with the fibre optic. The fibre optic
can with the optinal retaining pin be fixed (see Accessories (section 3.3) at page 4).
10
Figure 5: Rear side panel instrument case
Meaning
to connect fibre optic and panel instrument case
0.2 A, time lag
1.5 m fixed at the panel instrument case
analog output / output controller, 1.5 m fixed at the
panel instrument case
KLEIBER 217 R - LWL