Starting Up; Installation Site Requirements; Climatic Conditions; Requirements At The Place Of Use - KLEIBER 217 R - LWL Betriebsanleitung

6 Starting Up

6.1 Installation Site Requirements

CAUTION:
Measurement errors and damage to the pyrometer through:
ambient temperatures too high
strong contamination of the optics due to dust, smoke, steam or other causes like air pollution
electromagnetic interference sources
You must take into account the following climatic conditions and the requirements of the place of use
of the pyrometer!

6.1.1 Climatic conditions

The following requirements must be fulfilled with respect to the climatic conditions at the place of use of the
pyrometer:
temperature range 0 C bis +40 C (0 C bis +260 C for optical head and fibre cable)
maximum air humidity 60 % room temperature
atmosphere free of dust, corrosive vapors, and fume gases

6.1.2 Requirements at the place of use

Take into account the following requirements at the place of use of the pyrometer:
Take care with the choice of the place of use and take into account the ergonomic and the legal guidelines
for industrial safety in order to ensure safe operation of the pyrometer.
Do not expose the system to direct sunlight or radiation from heating (e.g. radiators).
Do not set the pyrometer near strong electromagnetic fields or near electromagnetic interference sources.
Make sure that the pilot light falls unhindered on the object being measured and that there is nothing in
the path of the rays.
KLEIBER 217 R - LWL
6 Starting Up
11