Setting Parameters In Programming Mode - Disty distybox 300 Bedienungsanleitung

You can now enter the parameter codes to change the
EXAMPLE
1. Enter the programming code for "Connection to an ISDN /
2. To activate the feature, enter:
3. You will hear a positive acknowledgement tone, followed
NOTE
Operating instructions
8. You will hear the special dialling tone indicating that
programming mode is active.
relevant features of your
Let's say, for example, you want to use your
a base station with an ISDN telephone connection. Activate
programming mode as described above in points 1 – 8 and
then proceed as follows:
analogue Line": 4
by the special dialling tone once more. The feature is now
active.

Setting parameters in programming mode

Not all the features offered by the
supported by every DECT/GAP base station. Refer to the
operating manual for your base station to clarify which
features you can use.
Programming mode needs to be activated before this pa-
rameter can be set. The function-programming process is
concluded by entering
acknowledgement tone. You will then hear the
special dialling tone once more, which means that you can
continue programming other functions. With the exception of
programming points 90, 91 and 99, the change is effective
without having to restart the
If an invalid value is entered during programming, a negative
acknowledgement tone is sounded, the procedure is cancelled
and you will hear the special dialling tone once more.
distybox .
300
0
0 #
distybox
# and confirmed by the positive
distybox .
300
distybox on
300
300 are
21
EN