Disty distybox 300 Bedienungsanleitung Seite 24

EN
NOTE
NOTE
24
Function
Set ARI number
Instead of the PARK number (see Parameter 80) the ARI number
can be used for subsciption. For input of the ARI number use 31
as prefix.
Factory setting: no ARI number set.
Reset distybox
300
The distybox 300 is reset to the factory settings.
This means, however, that the
gistered on a base station. All previous settings are deleted.
After unplugging / plugging in the adapter, the
is restarted and reprogramming of the
Reset parameter
The distybox remains registered on the base station;
300
all other parameters are reset to the factory settings.
After entering the parameter, replace the handset and wait for
30 seconds. The distybox
Parameter Other input
code
85 31 ARI #
90 #
distybox is no longer re -
300
distybox
distybox
91 #
will be restarted automatically.
300
300
can begin.
300
Operating instructions