Respekta CH 0150 IXB Bedienungs- & Installationsanleitung Seite 26

English
The coocer hoods are equipped with a rectangular 220-240V, 2W LED lamp module.
The ILCOS D code for the lamp module is: DBS-2/65-H-120/33
! The module may only be replaced by a designated specialist.
1 Disconnect the appliance from the power supply.
2 Remove the metal filter from the hood.
3 Press the lamp module out of the hood housing
from the inside.
4 Disconnect the connectors (a) and (b).
5 Connect the plug of the spare lamp (a) to the
connection cable (b)
6 Press the lamp module flush into the hood housing.
This hoods are equipped with 2 LED lamps 220-240V, 2W (DBR-2/65-H-64)
! The lamps may only be replaced by a designated specialist.
1 To replace, use a screwdriver to lever the lamp out of the hood
housing.
2 Disconnect the lamp from the lamp cable.
3 Connect the new lamp to the lamp cable and press it flush into
the hood housing.
fi181213atNEG
Installation- / User's Instruction Cooker hood
17. Replacing the Lamp
CH 0150 IXB
CH 0160 IXB
CH 0190 IXB
CH 22058 IXB / CH 22078 IXB
CH 22068 IXB / CH 22098 IXB / CH 22098-90 IXB
CH 44078-60 IXA / 44068-90 IXA
11
GB
(a)
(b)
Technical changes reserved