Inhaltsverzeichnis
Werbung
74
Disposal - Appendices
8.0
Storage
In case the machine is not to be used for a long period
of time (6 months or more) it is necessary to
disconnect all power sources, discharge the bead seater
tank (only GT version), protect all parts that may be
damaged, protect the air hoses that may be damaged
by the drying process. When putting the machine back
in operation, check first the condition of all previously
protected parts, and check for correct functioning of all
devices before using the machine again.
8.1
Instructions for disposal in
EU countries
For waste electrical and electronic equipment
At the time of disposal, at the end of the lifetime of this
equipment, you must:
1. NOT dispose of the equipment as municipal waste
and separate collection is mandatory.
2. Ask the retailer about collection points authorised
for regular disposal.
3. Stick to the standards for correct waste
management, to prevent potential effects on the
environment and human health.
This symbol indicates that separate collection of waste
electrical and electronic equipment is mandatory for
scrapping.
9.0
Appendices
This chapter contains additional information about the
balancer.
If reference is made to the exact configuration of the
unit, please note that the exact configuration can be
different in your country. Refer to the order confirma-
tion for details.
Operator's Manual
monty 5800
Werbung
Inhaltsverzeichnis
