Inhaltsverzeichnis
Werbung
84
Installation Instructions
Electric installation
THE INSTALLATION SHALL BE CARRIED OUT ONLY
BY QUALIFIED PERSONNEL AND WITHIN THE
SCOPE OF THE INSTRUCTIONS PROVIDED IN
THIS MANUAL.
Check on the plate of the machine that the electrical
specifica-tions of the power source are the same as
the machine.
Electrical specifications are clearly marked on a label
at the end of the electric cord.
Before connecting the machine to the power source,
check that the power supply has an efficient grounding
system.
Connect the electric cord of the machine with a
homologated plug.
NOTE:
The outlet installation must be verified by a licensed
electrician before connecting the tire changer.
NOTE:
The yellow with green wire in the cord is the grounding
wire.
Never connect the grounding wire to a live terminal.
Check that the power supply has an automatic circuit
breaker with a differential circuit set at 30 mA.
The electric motor operates in a wide voltage range (plus
10% - minus 7%) and frequency range (50 or 60 cycles)
and has a class of insulation suitable for hot and moist
climates.
Operator's Manual
monty 5800
Werbung
Inhaltsverzeichnis
