Inhaltsverzeichnis
Werbung
1
38
5.0-1
Operations
5.0
Mounting and demounting.
General precautions
CAUTION:
BEFORE MOUNTING A TIRE ON A RIM ENSURE
THE FOLLOWING RULES ARE OBSERVED:
A- THE RIM MUST BE CLEAN AND IN GOOD
CONDITION: IF NECESSARY CLEAN IT AFTER
REMOVING ALL WHEEL-WEIGHTS INCLUDING
'TAPE WEIGHTS' INSIDE THE RIM.
B- THE TIRE MUST BE CLEAN AND DRY, WITH NO
DAMAGE TO THE BEAD AND THE CASING.
C- FOR WHEELS FULL OR WATER OR OTHER
LIQUIDS, COMPLETELY REMOVE THE LIQUID
CONTAINED IN THE WHEEL BEFORE PLACING
IT ON THE TIRE CHANGER.
D- REPLACE THE RUBBER VALVE STEM WITH A
NEW ONE OR REPLACE THE 'O' RING IF THE
VALVE STEM IS MADE OF METAL.
E- IF THE TIRE REQUIRES A TUBE, MAKE SURE
THE TUBE IS DRY AND IN GOOD CONDITION.
F- LUBRICATION IS NECESSARY FOR CORRECT
MOUNTING OF THE TIRE AND PROPER
CENTERING. USE ONLY AN APPROVED
LUBRICANT FOR TIRES.
G- MAKE SURE THE TIRE IS THE CORRECT SIZE
FOR THE RIM.
H- THE TOOL LOCKING PIN (1,FIG.5.0-1) MUST BE
APPLIED ONLY WHEN USING THE DISC TOOL
ON RIM WHEELS.
Operator's Manual
monty 5800
Werbung
Inhaltsverzeichnis
